CyClone Elliptical Trainer Owner's Manual page 6

ASSEMBLY INSTRUCTIONS
STEP 6
"C" COMPUTER(33),
Install four size batteries into the four batteries included. Plug the
UPPER CONNECTION WIRE(32) COMPUTER(33). COMPUTER(33)
into the Then attach the onto
the plate
UPRIGHT(4) ROUND HEAD SCREWS(M5 x 10mm)(61).
on the with Press the
READING HOLDER(34) COMPUTER(33).
into the
STEP 7
STATIONARY HANDLEBAR(5) UPRIGHT(4) FLAT HEAD
Attach the onto the with
BOLTS
(M6 x 40mm)(70). PULSE PLUG WIRE(35) COMPUTER(33).
Plug the into the back of the
6