CyClone Elliptical Trainer Owner's Manual page 5

ASSEMBLY INSTRUCTIONS
STEP 3
LOWER CONNECTION WIRE(31)
Connect the
UPRIGHT(4)
the onto the
20mm)(68), LOCK WASHERS(M8)(78),
STEP 4
LEFT
Connect the and
BUTTON HEAD BOLTS(M10 x 55mm)(69), WASHERS(M10)(80),
STEP 5
PEDAL CAPS(45)
Attach the
BOLTS(M6 x 25mm)(65).
PEDAL CAPS(45)
CAPS(45)
for foot placement. You will have more vertical movement in the Elliptical stride if you place
your feet at the back of
PEDAL CAPS(45).
the
CAUTION:
The lip on the
shown.
MAIN FRAME(1)
RIGHT PEDAL ARMS(10, 11)
LEFT
onto the
PEDAL DIVIDERS(46)
Slide the
to fit your shoes.
PEDAL CAPS(45)
UPPER CONNECTION WIRE(32).
to
and secure with
WASHERS(M8)(79).
and
PEDAL ARM CONNECTORS(12)
to the
RIGHT PEDAL ARMS(10, 11)
and
You may select the front or the back of the
must face inside.
5
BUTTON HEAD BOLTS(M8 x
NYLOCK NUTS(M10)(76).
and
ROUND HEAD
with
into one of the four slots on the
The sides without a lip face outside as
Insert
with
PEDAL