Data Retrieval Guide - Toshiba RBC-AMS51E Quick Reference Manual

There are two levels for system data, the first level is the monitor mode, which shows basic temperatures
indoor and outdoor, filter time and system running hours.
To access this data press the
To access the second level of data display.
5) Press the
display the "Menu
6) Press and hold the"
and the "
for more than 4 seconds to display the
"Field setting menu"
7) Scroll down to item "4" using the
" "button.
8) Press "F2
9) Press the "
through the codes, for details of codes refer to the following charts.
Data is available for "0, 1, 2, 3 & 4 Series" Digital/Super Digital Inverter and VRF equipment

Data Retrieval Guide

1) Display's the set temperature.
2) Display's the temperature measured by the TA return air sensor
within the indoor unit. If the system is programmed to use the room
sensor in the remote controller this will be displayed replacing the TA
data.
3) Display's the temperature measured by the TO ambient air sensor
within the outdoor unit.
4) Display's the remaining time until the filter sign is displayed.
5) Display's the accumulated operating time of the system.
button to
screen"
" button
"button at the same time
"
" to scroll
(Mini -SMMS, SMMS, SMMSi & SHRM).