Samsung HG22EA470UW Installation Manual page 46

y Cautions for Hospitality mode options
- Hospitality Mode: should be Standalone. – Interactive mode could not support SIRCH.
- Power On Source must be set TV. If you select others external source, SIRCH cannot support upgrade.
- If you try to upgrade SIRCH in external source (PC/HDMI...), SIRCH could not support upgrade by manual SIRCH /
SIRCH Update Time.
- SIRCH Upgrade Time: not off.
- Dynamic SI should be set 'Off' to modify DTV display channel map in channel map tap.
y Which all TV broadcasting standard supported by SIRCH application?
SIRCH application support only ATSC and DVB .
How to add channels for DVB /ATSC?
y
User need to select particular TV region and model no. On basis of these parameter application allow to add channel
for DVB(for EU) or ATSC (for US). Please refer section 2.7.
What all broadcasting type SIRCH Modulator supports?
y
SIRCH modulator support only DVB-C (for DVB)and OpenCable(for ATSC) standard for broadcasting.
y What is difference b/w Channel in channel map and Channel configured in SIRCH modulator?
– Channel in Channel Map are used watch channel on TV. We can add more than one channel in channel map. It is in
form of clone data and transfer using seed stream. On other hand Channel configured in SIRCH modulator is used
for broadcast data (clone or binary) from modulator with fixed frequency or channel number. This same channel
number is used on TV named as SIRCH channel for software update. (Please refer Appendix A).
46
English
[Hotel-XC]Install Guide-ENG.indd 46 2012-03-30 1:28:07