Samsung HG22EA470UW Installation Manual page 23

Hotel TV Function
No
Category
11 External Source
12 Bathroom Speaker
13 Eco Solution
14 Logo/Message
15 Cloning
[Hotel-XC]Install Guide-ENG.indd 23
initial value
USB Media
Default
Mode
External Source
Enable/Disable
Banner
Auto Source OFF
Anynet+ Return Power On
Source Src....
Sub AMP
13
volume
Sub AMP mode 2
Energy Saving Off
Welcome
OFF
message
Edit Welcome
Message
Hospitality Logo OFF
Hospitality Logo
-
DL
Logo Display
5 Seconds
Time
Clone TV to
-
USB
Clone USB
-
to TV
Setting Auto
OFF
Initialize
Description
Control Pop-Up menu at USB insert to TV.
Users can set External Source Banner to On or Off.
On : When TV power On or Mode changed, TV will disply the
external source banner.
Off : When TV power On or Mode changed, TV will not disply
the external source banner.
While TV is in power on state, if PC source is connected to TV,
TV will automatically switch to PC mode.
Set the return source after closing Anynet+.
Sub AMP Volume level at power on initial condition.
Determines the Sub AMP operation mode.
- 0: Turns the Sub AMP function off (PWM off).
- 1: Determines the Sub volume according to the main volume
control.
That is, the sub volume is determined according to the Power
On Volume, the Min Volume, and the Max
- 2: Determines the volume according to the bathroom control
panel setting.
This feature adjusts the brightness of the TV in order to reduce
power consumption.
- Off: Turns off the energy saving function.
- Low: Sets the TV to low energy saving mode.
- Medium: Sets the TV to medium energy saving mode.
- High: Sets the TV to high energy saving mode.
- Auto: Sets the TV to automatically energy saving mode.
Display Welcome Message.
Edit Welcome Message.
Use can set the logo display Off or the type of logo file (BMP/
AVI).
Download the logo file from USB toTV.
Set the logo display time.
USB Clone: TV → USB
USB Clone: USB → TV
When Setting Auto Initialize is set to On, and the power is
turned off and on or the Master Power is turned off and on, the
data is restored to the cloned values.
If there is no cloned value, even when the Setting Auto Initialize
is set to On, it will be ignored and the operation will be the
same as that whenSetting Auto Initialize is set to Off
23
English
2012-03-30 1:27:54