Table of Contents
Advertisement
Installing Mobile Connect Basic
software for Windows
Insert your Turbo Card into an available card slot on your computer.
Do not forcibly insert the device as this may damage both the device
and the card slot. Your Turbo Card powers on when inserted, and the
computer may beep.
note: Windows Vista may display a security warning stating that
Mobile Connect Basic is not a trusted application. You may safely
dismiss this warning and continue with the installation.
Installation should automatically begin, however you may be
prompted to install Mobile Connect Basic. Select install/Run Mobile
connect Basic.
If the auto install fails to start, remove your Turbo Card and use an
alternate Internet connection to download and install the software
from our website at bell.ca/mobileconnect before inserting your Turbo
Card, or you can manually install the software from your Turbo Card
by:
1. Selecting Start > Run > Browse...
2. Look in "My Computer" to find the Turbo Card disk drive
3. Run the file "carrier.exe"
note: The drive letter assigned to the Turbo Card by the computer's
operating system will be the next available drive letter (e:\, f:\, g:\, etc.)
7
Advertisement
Table of Contents
