Inserting And Removing The Turbo Card From Your Computer - Bell Novatel Wireless X950 Getting Started Manual

Inserting and removing the Turbo Card
from your computer
Now that the Mobile Connect Basic software is installed on your
computer, your Turbo Card can be inserted or removed at any time.
It is recommended that you Exit Mobile Connect Basic from the
Tools menu and use the "eject" function of your computer before
removing the Turbo Card.
As an external device, your Turbo Card is vulnerable to damage during
transport. It is recommended that you remove and securely store the
device when transporting your computer.
to insert your turbo card:
1. Insert your Turbo Card into the card slot. Do not forcibly insert the
device as this may damage both the device and the card slot.
2. Your computer will beep.
3. Start Mobile Connect from the desktop or from the autoPlay prompt.
4. Your Turbo Card powers on when inserted.
to remove your turbo card:
1. Disconnect from the network and Exit or Quit Mobile Connect
from the Tools menu.
2. Carefully remove your Turbo Card from the card slot by
pressing the button beside the card.
3. The computer will beep.
Using your turbo card on another computer:
Your Turbo Card can be used on multiple computers. Simply install
the Mobile Connect software on each new computer you wish to use.
note: Data network usage is tied to the device itself and that usage
between computers is cumulative and will be billed together.
15