Ec Declaration Of Conformity - Datalogic Magellan 8300 Quick Start Manual

Product reference manual (558 pages)

Technical manual (94 pages)

Quick reference manual (21 pages)

Table of Contents

Datalogic hereby declares that the equipment specified below and as referenced in the EC Type Approval Certificate has been tested

and found compliant to the following European Council Directives and Harmonized Standards:

Equipment Type:

Apparatus

EC Type Approval Certificate:

Year in which "CE"marking was

first affixed:

Manufactured by:

Placed into EU Service:

Council Directives: Non-Automatic Weighing Instruments 2009/23/EC

Standards:

A technical construction file for this apparatus is retained at the above USA address

The EU Declaration of Conformity is covering only the scanner/scale. The connection of this apparatus to Point of Sale (POS) system is subject to legal

W&M requirements, required additional verification & tests where the system will be used. These tests can be done only by NAWI manufacturer, certified

partner or notified body listed by the country.

The manufacturer of the POS and the owner of the complete scale/POS system must ensure there is a declaration of conformity for the complete system.

Any modification to the system which affects metrological parameters must be covered by a new declaration of conformity and is not the responsibility of

Datalogic Scanning, inc..

Scanner/Scale defined with gravity zone can be used only into this predefined zone. If the seal of the system are missing or broken, the instrument does not

conform and should be put out of service.