Page 1
Sylvania ::dtek Tekniko Texscon Regal Regerq Samsung universal ki. Atlanta Signature Viior WomeC Sprucer Storcom Storgote 2000 lo& 2000 Clements Bridge Road Deptford, NJ 08096-2088 lJ1003 Trademark(s) 8 Registered Marca Registrada(s) Made in Mexico Printed in the USA RCU400 inc.
If batteries are removed from the remote, it will require reprogramming. Determine. if your remote needs programmmg (Some RCA, GE and ProScan devices may already be prP-programmed. Press the button of the device you want to control (for example TV).
Custom TV Button Sets the remote to bring up favorite channels programmed a number button. See Page 14. Code Search Button Programs devices by searching through brand codes. Use when code lists are not available or when the listed code does not work with device.
Programming a TV using the Code Lists Find codes for your brand of TV on the next page. Press and hc&l CODE SEARCH. Press and release the TV button. When the TV button flashes pro- ceed to the next step. Enter the three digit code from the TV code list.
Programming a VCR using the Code Lists Find codes for your brand of VCR on the next page. Press and hold CODE SEARCH. Press and release the VCR button. When the VCR button flashes proceed to the next step. Enter the three digit code from the VCR code list.
Page 8
Programming a Cable Box using the Code Lists Find codes for your brand of Cable Box on the next page. Press and hold CODE SEARCH. Press and release the button. When the Cable button flashes proceed to the next step. Enter the three digit code from the Cable Box code list.
Page 9
Samsung TV/VCR combo unit may be controlled by both the Samsung TV code and the Samsung VCR code. Pioneer..018,020,044 RCA..000,027 Randtek Regal ..003,012,013 Regency ..002,033 Samsung Sci. Atlanta*..003,022,025 ..
The AUX Button can be used to program a second TV, VCR or Cable Box. Press and hold CODE SEARCH. Press and release the AUX button first and then the device to be programmed When the selected device BOX). button flashes proceed to the next step.
Follow the steps below to set up your remote using the Code Search method. If you complete these steps and your device does not respond, follow the Code List method for your device. Programming a Device using CODE SEARCH Manually turn on your device (TV, VCR, Cable Box).
Page 12
Turning the TV On and Off 1. Press TV to set the remote to con- trol the TV (Most RCA, GE and ProScan models will only turn on when is pressed, not OFF/ON). 2. Press OFF/ON to turn the TV on or off.
Page 13
Turn the VCR On and Off 1. Press VCR to set the remote to control the VCR. (Most RCA, GE and ProScan models will only turn on when pressing VCR not OFF/ON). 2. Press OFF/ON to turn the VCR on or off.
Page 14
The CUSTOM button allows you to store 10 of your favorite TV channels in memory You can access these chan- nels using the remote’ s number buttons. below to program channels to each of the number buttons. Programming the Custom Button 1.
Page 15
RCA, GE and PROSCAN Many of these devices (TVs and VCRs) do not need to be programmed. In the event that programming the code search method is suggested. Note: With these brands, the device button (TV, VCR) will usually turn the units on. The OFF/ON button will only turn these devices off.
Page 16
Universal MULTI-BRAND Plus Lighted Device Keys tight when remote is in use to indicate which device it is controlling ’ Seeback for details Requires 4 AM Batteries RCU400...
Need help?
Do you have a question about the RCU400 and is the answer not in the manual?
Questions and answers