HP Compaq Presario F500 Maintenance And Service Manual page 50

4.
Remove the display assembly (2).
5.
If it is necessary to replace any of the display assembly internal components, remove the eight rubber
screw covers from the display bezel:
NOTE:
(1) Four covers on the top edge of the bezel
(2) Two covers on the lower bezel corners
(3) Two covers on the lower-inside edge of the bezel
The display bezel rubber screw covers are included in the Display Screw Kit, spare part number
431400-001.
Chapter 5 Removal and replacement procedures
44
There are three different sizes of rubber screw covers on the display bezel.