Dell Latitude E6320 Owner's Manual page 73

NOTE: Steps 1 and 2 are applicable for computers that shipped in the United States
of America.
2. Replace and tighten the screw to secure the TAA board to the computer.
3. Align the system board into its original position on the computer.
4. Connect the power supply cable.
5. Replace and tighten the screws to secure the system board to the
computer.
6. Route and connect the smart card and speaker cables to the system board.
display assembly .
7. Install the
display hinge covers .
8. Install the
palmrest assembly .
9. Install the
keyboard .
10. Install the
keyboard trim .
11. Install the
hard drive .
12. Install the
ExpressCard .
13. Install the
base cover .
14. Install the
optical drive .
15. Install the
Secure Digital (SD) card .
16. Install the
battery .
17. Install the
18. Follow the procedures in
After Working Inside Your Computer .
73