Installing The Bezel - Dell PowerVault MD3600f Get Started Manual

3 MD3600f series storage array
NOTE:
status LED is blue.
4 Host server(s)

Installing the Bezel

Install the bezel (optional).
Installing HBAs and Drivers
NOTE:
Ensure that you read the Configuring Fibre Channel With the Dell MD3600f
Series Storage Array document before continuing with this procedure. For detailed
instructions about installing the MD storage software, setting up the enclosure, and
the post-installation tasks, see the Deployment Guide.
1 Physically install the HBAs.
2 Connect the cables.
3 Install the HBA drivers and the operating system HBA patches/hotfixes.
4 Ensure that the recommended HBA settings are applied.
Before turning on the host server(s), ensure that the storage array
Getting Started With Your System
13