Installing The Bezel - Dell EqualLogic PS4000 Hardware Maintenance

PS4000 Hardware Maintenance
2. Press the handle release button to release the handle. Open the handle.
3. With the handle at an angle, slide the disk drive completely into the slot,
simultaneously pushing in the handle until you hear a click. See Figure 2-7.
Figure 2-7: Closing the Disk Drive Handle
Verify that the new disk drive is operational by examining the LEDs on the front
panel, as described in Interpreting Disk Drive LEDs on page 2-3. In addition,
examine the GUI Member Disks window and the CLI
command output.
disks

Installing the Bezel

After you install all the replacement disk drives or blanks, re-install and lock the
bezel.
1. Facing the front of the array, fit the right side of the bezel into the right side of
the chassis.
2–8
Maintaining Disks
member select show