There are two ways to connect HELIX Ethernet units together to form a system. One method is to
'daisy chain' the units and the other is to connect each one directly to an Ethernet switch or hub.
Each HELIX Ethernet unit has an ETHERNET two-port switch on the rear panel that provides Ethernet
connectivity.
Note
When connecting the Ethernet cable to the rear panel of a HELIX unit, either of the Ethernet
ports can be used.
3.1
Connecting the HELIX units in a 'daisy chain'
The following diagrams show typical examples of HELIX DN9340E/DN9344E and DN9848E units
interconnected via their Ethernet two-port switches to form a 'daisy-chain'.
HELIX Remote Control: Hardware Set-up Guide
3
HELIX U
NIT
I
NTERCONNECTIONS
9
User Guide