Installation; Attaching And Aligning The Appliance - Gaggenau AW 230 790 Use And Care Manual

Installation

1 Screw on the angle bracket for the flue duct.
2 Screw on brackets for the extractor hood hand-
©
tight, max. 3 Nm .
3 Screw in threaded bolt, leaving it protruding out
of the wall by
¨

Attaching and aligning the appliance

1 Initially remove the protective foil from the back of
the appliance and, following installation, remove
foil completely.
2 When attaching the appliance, ensure that it
engages firmly with the brackets.
3 Align the appliance horizontally by turning the
brackets. If required, the appliance can be moved
to the right or left.
ª
.
3 / " - 11 / " (5–9 mm)
16 32
«
¬
19