How To Remove Parts - Hitachi R-SF42BMS How To Use Manual

HOW TO REMOVE PARTS

Height adjustable shelf Lower shelf
Slightly lift up the
1
back of the shelf
and draw it.
Raise the shelf as
2
shown in fi gure,
and turn it and
remove it.
When installing the shelf, slide it until it reaches to the
interior wall, then slightly lift up the back of the shelf
and push it in. (hitch the forks of the shelf to the parts
on the back of the shelf)
Caution
Door may damage if drawing the shelf
without turning it.
Draw the shelf, and pull off
the two pins on the lower
right and remove it.
Slightly lift up and pull out.
Pull out the case to the full,
lift the front side slightly
and then remove it.
48
Fixed shelf
Reversible shelf
Chill room
Slide case