Hitachi R-SF42BMS How To Use Manual page 49

1
When installing it, insert the pins on the left/right of the Lower freezer case into the square holes on the
frame to install it.
Moreover, hitch the pins on the left/right of the Slide case to the outside of the Lower freezer case.
1
Draw the door fully and pull up
the Spacious upper case as
shown in the fi gure.
How to install the slide door
Ice Compartment/Upper Freezer
Lift up the door pocket while tapping
the left/right of its bottom surface, and
remove it.
Insert the door pocket fully to the end when
installing it.
Ice Compartment/ Upper Freezer
Draw the door fully and lift up the case
towards you.
Insert the left and right pins (four pins) of the
case into the square leg hole on the frame to
install it.
Lower Freezer
Draw the door fully, and draw the Slimline
slide case and the Slide case respectively.
Vegetable Compartment
2
Lift up the front part of the door,
and draw it further and incline it.
Frame
Door pocket
Frame
2
Pin
Frame
3
Frame
Lift up the Lower Case.
When installing it, insert the pins
on the left/right inner sides of the
Lower Case into the square holes on
the frame, and put the edge of the
Lower Case on the frame to install it.
Vegetable Compartment/Lower Freezer
Tap
Tap
Lift up the Lower
freezer case.
Frame
49