Activating the grinder
selection
T Place a cup under the dual spout.
T Press and hold the
'Coffee'
and the fill volume are displayed.
T Hold the
'Coffee'
button.'
appears.
T Release the
'Coffee'
Preparation starts and the coffee flows into the cup.
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
set amount of water for one coffee is permanently stored.
'Please select product:'
E You can alter this setting at any time by repeating the above
procedure.
E The amount can be permanently adjusted to the cup size for
the products shown in the product selector too. To do this,
press and hold the Rotary Switch k until
Press button.'
E You can also permanently set the amount for all speciality
coffees, milk and hot water in programming mode (see Chap-
ter 4 'Permanent settings in programming mode – Product
settings').
You have the option of configuring the start screen such that the
grinder selection ('beans à la carte') is always displayed. Before each
preparation, you can select which grinder is to be used and therefore
which coffee beans are to be used.
E If the grinder selection is activated, you can no longer set the
grinder for the individual products in programming mode (in
the
'Product settings (2/5)'
Example: Proceed as follows to activate 'beans à la carte' mode.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (4/5)'
'Coffee'
button.
button down until
button.
'Saved'
appears briefly on the display. The
appears on the display.
appears.
programme item).
is displayed.
is displayed.
2 Preparation
'Enough coffee? Press
'Enough coffee?
'Machine
21