Starting The Appliance - Worcester GREENSTAR 24i Junior Installation Instructions Manual

5.5

STARTING THE APPLIANCE

CAUTION: RUNNING THE APPLIANCE
B Never run the appliance when the
appliance/system is empty or partially
filled.
1
Fig. 61 Control panel
Switching the appliance on/off:
B Turn on mains power supply, the power on indicator
(5) illuminates BLUE.
B Turn on any external controls
B Set the thermostatic radiator controls to maximum
temperature
B Set the clock/programmer to continuously ON and the
room thermostat to maximum temperature
1 Central heating temperature control
2 Burner indicator (Green)
3 Service button
4 Cover or optional Programmer
5 Power ON and fault indicator (Blue)
6 ECO button
7 Reset button
8 System pressure gauge
Tab. 22 Control panel legend
6 720 644 741a (2010/10)
2 3 4 5 6 7
Turn the boiler CH temperature control (1) to maximum.
The burner on indicator (2) illuminates GREEN when the
burner has lit.
If the boiler fails to light, the BLUE power indicator (5)
and reset button (7) will flash.
NOTICE: RESET
B Do not press the blue power indicator to
reset the boiler.
To reset press and hold the reset button (7) for more
than two seconds. The boiler will be reset.
COMMISSIONING
8
39