Bosca Limit 380 Installation Manual page 7

INSTRUCTIONS FOR REPLACING THE BAFFLE
SPIRIT 550 (continued)
4. To remove the baffle, hold
it with both hands and slide
it forward so that the bolts
separate from the back of
the stove.
5. To stop the baffle from
falling, tilt it slightly from the
back so that you can hold
it firmly with your hands.
Straighten it and remove it
from the stove.
6. To mount the baffle back
in it's original position, insert
it into the firebox as indicated
by the arrows and rest it on
the supports designed for it.
Ensure the oxygenating
tube and the bolts are fully
inserted in the perforations
located in the back of the
stove. Place the nuts and
tighten them.
FIREPOINT 360
1. The first stage consists
of removing the anchoring
bolts of the baffle. This will
require an 11mm spanner.
2. Undo the 1/4" (stain-
less steel) bolts from
the inside of your stove
counter-clockwise with the
spanner.
To facilitate the process,
we recommend you
first lubricate the bolts
with WD40 or a similar
product.
3.Once the bolts are
loose, undo them until you
have completely removed
them from the bolts. Set
them aside so as to avoid
losing them.
You can now remove
the baffle from inside the
stove. Do so from the front
of the unit.
— 5 —
4. To remove the baffle, hold
it with both hands and slide
11mm spanner
it forward so that the bolts
separate form the back of
the stove.
5 To stop the baffle from
falling, tilt it slightly from the
back so that you can hold
it firmly with your hands.
Straighten it and remove it
from the stove.
6. To mount the baffle, back
in it's original position, insert
it into the firebox as indicated
by the arrows and rest it on
the supports designed for it.
Ensure the oxygenating
tube and the bolts are fully
inserted in the perforations
located in the back of the
stove. Place the screws and
tighten them.