How Do I Clean The Flue On My Stove - Bosca Limit 380 Installation Manual

OPERATING INSTRUCTIONS
We recommend the flues of your stove be cleaned by an authorised techinical service. If this is
not possible for any reason, you can clean the flues yourself by following the instructions indicated
below. The tools you will need are a ladder, a screwdriver and a steel brush. After cleaning the
flue, check the state of the seal between the flues and the sheet. If necessary, we recommend you
reseal with a suitable high temp sealant.
How do I clean the flues of my stove?
Your stove is installed in such a way that the flues can be cleaned without uninstalling the unit.
1. Make sure the stove and the flues are both
cold before touching them. We recommend
using safety gloves to protect your hands.
2. Unscrew the cap and remove it.
IMPORTANT
Bosca stoves contain a baffle that must be dismounted in order
to clean the unit.
3. Remove the anchoring screws to dismount
the baffle of your stove. We recommend you
carefully read the instructions on removing the
firebox baffle.
Oxygenating Tube
Baffle
Support
Baffle
Anchoring
Screws
4. It is not necessary to totally remove the
baffle from the stove once it is dismounted in
order to clean the flues.
5. Slide the weight inside the upper side of
the flue all the way down until it appears
inside the stove.
6. Pull the rope inside the stove so that the
steel brush moves up the flue. Repeat this
operation 6 times. Do not use regular steel
wool instead of a steel brush.
Keep the door as closed as possible to avoid
soot being dispersed outside of the stove.
— 9 —