Table of Contents
Advertisement
INSTRUCTIONS FOR REPLACING THE BAFFLE
LIMIT 380
1. The first stage
consists of removing the
anchoring bolts of the
baffle. This will require
an 11mm spanner.
2. Undo the 1/4"
(stainless steel) nuts on
the back of your stove
counter-clockwise with
the spanner.
To facilitate the process,
we recommend you
first lubricate the nuts
with WD40 or a similar
product.
3. Once the nuts are
loose, undo them until
you have completely
removed them from the
bolts. Set them aside to
avoid losing them.
You can now dismount
the baffle from inside the
stove. Do so from the
front of the stove. Place
the screws and tighten
them.
4. To remove the baffle,
hold it with both hands
11mm spanner
and slide it forward so that
the bolts separate from
the back of the stove.
5. To stop the baffle from
falling, tilt it slightly from
the back so that you can
hold it firmly with your
hands. Straighten it and
remove from the stove.
6. To mount the baffle
in its original position,
insert it into the firebox as
indicated by the arrows
and rest it on the supports
designed for it.
Ensure the oxygenating
tube and the bolts are fully
inserted in the perforations
located in the back of the
stove. Place the nuts and
tighten them.
— 4 —
SPIRIT 550
1. The Spirit model stove
has a dismountable
back panel that must be
removed. You will need an
11mm spanner to do this.
2. Loosen the bolts located
on both sides of the panel.
3. Undo the 1/4" (stainless
steel) nuts on the back of
your stove counter-clock-
wise with the spanner.
To facilitate the process, we
recommend you first
lubricate the nuts with
WD40 or a similar product.
Once the nuts are loose,
undo them until you have
completely removed them
from the bolts. Set them
aside so as to avoid losing
them.
You can now remove the
baffle from inside the stove.
Do so from the front of the
stove.
11mm spanner
Hide quick links:
Advertisement
Table of Contents
