Connecting To A Television Via Miracast - TrekStor SurfTab xintron i 10.1. Operating Instructions Manual

Connecting to a television via Miracast™

Miracast technology is a peer-to-peer standard for image transfer. The SurfTab
supports this standard and enables wireless transfer of image and sound from
the SurfTab to a WiFi and Miracast-enabled television device.
The SurfTab can connect to your television via Miracast only if the television also
i
supports Miracast technology. Please check with your television manufacturer
if necessary.
Proceed as follows to connect your SurfTab to a Miracast-enabled television:
a) First, take all of the necessary steps to prepare your Miracast-enabled
television for the Miracast transfer (consult your television's operating
instructions for details).
b) Select "s
ettings
c) Activate the WiFi function on the SurfTab. To do so, select "W
menu column and drag the on/off switch for WiFi from "o" to "i".
d) Further down in the left menu column you will find the "d
Tap "d ".
isplay
e) Now drag the right menu column up until you can see the "W
menu item at the very bottom. Tap "W
f ) You will find the on/off switch for the wireless transfer at the top right of
the display. Drag this switch from "o" to "i".
g) A list of all available Miracast devices will appear. Tap the device that you
wish to connect to.
h) A short time later, the selected device will show the display of the SurfTab.
If your television device does not support Miracast technology, a "Miracast dongle"
i
can be used to connect the SurfTab via Miracast. In this case, you must ensure
that the selected dongle is compatible with both the SurfTab and your television.
" in the applications menu on the SurfTab.
d ".
iReless isplay
-f " in the left
i i
" menu item.
isplay
"
iReless display
EN
23