Connecting To A Television Via Miracast - TrekStor SurfTab duo W3 Operating Instruction

Connecting to a television via Miracast

Miracast technology is a peer-to-peer standard for image
transfer. The SurfTab supports this standard and enables wireless
transfer of image and sound from the tablet to a WiFi and
Miracast-enabled television set.
i
NOTE
The SurfTab can connect to your television via Miracast
only if the television also supports Miracast technology.
Please check with your television manufacturer if
necessary.
Proceed as follows to connect your tablet to a Miracast-enabled
television:
a) First, take all of the necessary steps to prepare your Miracast-
enabled television for the Miracast transfer (consult your
television' s operating instructions for details).
b) Call up the settings (see Section 12).
c) In the settings, tap "d
"C
onneCted deviCes
d) Now tap "A
available devices. This process may take a moment. All available
devices are then displayed in a pop-up window.
e) Tap the device that you wish to connect to. The two devices
now connected to each other.
f ) A short time later, the selected device will show the display
of the SurfTab.
eviCes
" on the left.
" in the top centre. The SurfTab searches for
dd A deviCe
" and in the following window tap
43 EN