Tuning; Automatic Tuning; Manual Tuning; Preset Stations - Grundig Traveller II Digital User Manual

TUNING TO A STATION
There are two possibilities for tuning into a station:
- Automatically - the stations are sought automatically.
- Manually - this is easy if the frequency of the station is
already known (eg. from your radio or television guide).

AUTOMATIC TUNING

• Keep + or - (TUNING UP or DOWN) pressed down
until the frequency on the display changes continuously.
Tuning will stop automatically as soon as a station is found.
• Repeat this until you have found the desired station.
AUTOMATIC TUNING
• Keep + or - (TUNING UP or DOWN) pressed down
until you come close to the desired frequency.
• Then briefly press the other TUNING button; the tuning
will stop.
• Then press + or - (TUNING UP or DOWN) repeatedly
until you reach the desired frequency.
PRESET RADIO STATIONS
You can program 20 stations into the memory, 5 on each
wave-band.

Programming

• Press POWER button to switch on the radio.
• Tune to a rdaio station Automatically or Manually.
• Press the MEMO button. The 'MEMO' sign starts flashing
on the display.
• Press the PRESET button to store the selected station.
• Press the MEMO button again to complete the storing
procedure.
- The program indicator 'MEMO' disappears from the
display and the preset number that was stored is shown
in the right corner of the display.
• Repeat these steps for the other stations you wish
to program.
11