General Information; Warnings; Recycling; Technical Specifications - Grundig Traveller II Digital User Manual

GENERAL INFORMATION

WARNINGS

- Rain, damp and excessive heat are bad for the radio and
the batteries.
- DO NOT leave the set for any length of time in direct
sunlight or other places where high temperatures can
occur, such as a vehicle parked in the sun.
- Leave repairs to a recognized dealer or service organization.
- If you decide to repair the set yourself, the guarantee will
be invalidated.

RECYCLING

Please observe the local regulations regarding the disposal of
packing materials, exhausted batteries and old equipment.
• All redundant packaging material has been omitted. We
have done our utmost to make the packaging easily seperable
into three mono-materials:
- Cardboard (box), expandable polystyrene (buffer) and
polyethylene (bags, protective foam sheet).
• All materials can be recycled if disassembled professionally.
• DO NOT dispose of batteries with your household waste.

TECHNICAL SPECIFICATIONS

Power Supply - by 3x 1.5 V batteries (AA)
External supply - by a commercial 4.5 V DC mains unit
Output Power - 250 mW
Built-in Antenna - Telescopic antenna for FM and SW
- Ferrite rod antenna for MW
Connecting sockets
For external voltage supply DC 4.5V
Coaxial socket (outer diameter 5.5 mm, inner diameter 2.1 mm)
Neutral conductor connected to chassis
For earphone/headphone
Socket for jack plug of 3.5 mm O , 32 Ohm impedence
Wavebands FM
MW (10 kHz steps)
MW (9 kHz steps)
SW1
SW2
Tuning Steps FM
AM
resp. MW
Dimensions approx. 138w x 90h x 35d mm
Weight approx. 590 g
16
O
87.5
520 1710 kHz
522 1620 kHz
2.30 7.40 MHz
9.40 26.10 MHz
50 kHz
5 kHz
/9 /10 kHz
108 Mhz