Kenmore 796.4031*9 series Use And Care Manual page 4

Front-loading automatic washer
Hide thumbs Also See for 796.4031*9 series:
Table of Contents

Advertisement

Available languages

Available languages

To reduce the risk of fire, electric shock, or injury to
persons when using this appliance, follow basic
precautions, including the following.
• Unplug the washer before cleaning to avoid the risk of
electric shock.
• Never use harsh chemicals, abrasive cleaners, or
solvents to clean the washer. They will damage the finish.
• Do not put oily or greasy rags or clothing on top of the
washer. These substances give off vapors that could ignite
the materials.
• Do not wash items that are soiled with vegetable or
cooking oil. These items may contain some oil after
laundering and may catch fire.
• Disconnect this appliance from the power supply
before attempting any user maintenance. Turning the
controls
to the OFF position does not disconnect this
appliance from the power supply. Failure to follow this
warning can cause serious injury, fire, electrical shock, or
death.
• Do not combine detergents, fabric softeners, and other
laundry products from different manufacturers for use
in one load unless specified on the label.
• Do not mix chlorine bleach with ammonia or acids
such as vinegar. Follow package directions
when
using laundry products.
Incorrect usage can produce
poisonous gas, resulting in serious injury or death.
• Do not reach into the washer while parts are moving.
Before loading, unloading,
or adding items, push in the
cycle selector knob and allow the drum to coast to a
complete stop before reaching inside.
Failure to follow this warning can cause serious injury, fire,
electrical shock, or death.
• Refer to INSTALLATION INSTRUCTIONS for detailed
grounding procedures. Installationinstructions are packed
in the washer for installer's reference. If the washer is
moved to a new location, have it checked and reinstalled by
a qualified service person. Failure to follow this warning can
cause serious injury, fire, electrical shock, or death.
• Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord. Failure to
follow this warning can cause serious injury, fire, electrical
shock, or death.
• For personal safety, this appliance must be properly
grounded.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
•The power cord of this appliance is equipped with a 3-
prong (grounding)
plug which mates with a standard 3-
prong (grounding)
wall outlet to minimize the possibility
of electric shock hazard from this appliance.
•This washer must be plugged into a 120VAC, 60Hz
grounded outlet. Failure to follow this warning can cause
serious injury, fire, electrical shock, or death.
• Have the wall outlet and circuit checked by a qualified
electrician
to make sure the outlet is properly
grounded.
Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
•Where a standard 2-prong wall outlet is encountered,
it
is your personal responsibility
and obligation
to have it
replaced with a properly grounded 3-prong wall outlet.
Failure to follow this warning can cause serious injury, fire,
electrical shock, or death.
• Do not install on carpet. Install washer on a solid floor.
Failure to follow this warning can cause serious leak
damage.
• Do not remove grounding prong. Do not use an
adapter or extension cord. Plug into a grounded 3-
prong outlet. Failure to follow these warnings can cause
serious injury, fire, electrical shock, or death.
• The washer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best
performance and also prevents overloading house wiring
circuits which could cause a fire hazard from overheated
wires.
• Never unplug your washer by pulling on the power
cord. Always grip plug firmly and pull straight out from the
outlet. Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• Immediately repair or replace all power cords that have
become frayed or otherwise damaged. Do not use a
cord that shows cracks or abrasion damage along its
length or at either end. Consult with a qualified service
person. Failure to follow this warning can cause serious
injury, fire, electrical shock, or death.
• When installing or moving the washer, be careful not
to pinch, crush, or damage the power cord. Failure to
follow this warning can cause serious injury, fire, electrical
shock, or death.
• The washer must be installed and electrically
grounded by a qualified service person in accordance
with Iocalcodes to prevent shock hazard and assure
stability during operation.
• Washer is heavy. Two or more people may be needed
to install and move the appliance. Failure to do so can
result in back or other injury.
• Store and install the washer where it will not be
exposed to temperatures
below freezing or exposed to
outdoor weather conditions. Failure to follow this
warning can cause serious leak damage.
• To reduce the risk of electric shock, do not install the
washer in humid spaces. Failure to follow this warning
can cause serious injury, fire, electrical shock, or death.

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

4031 - 4.2 cu. ft. front-load washer

Table of Contents