Table of Contents
Advertisement
C
To check the oil level, fix the bike perpendicular to
floor. If the engine was running wait few minutes.
Check the level with the rod joined to the oil cap:
remove oil cap, clean the rod, introduce and get out the rod,
now you can see the oil level.
This level must be between max and min.
If it is too high, drain the excess. If it is too low, add the
necessary quantity by opening the oil cap. Use the same type
and make of lubricant as that which is already in the engine.
Refill oil removing
C
the cap (A).
C
-22-
The cap to make the
engine empty of oil is
located at the botton left
of engine.
Hide quick links:
Advertisement
Table of Contents
