Download Print this page

Rinse And Spin - Kenmore 110.2942 series Quick Start Manual

Kenmore washer quick start gide

Advertisement

Available languages

Available languages

• You should select the wash/rinse water temperature based on the type of load you are washing.
° Always use the warmest wash water safe for fabric and follow garment label instructions. For recommended use, see the Use
and Care Guide.
• Depending on location, water temperatures may vary by season. The fill rate may atso differ depending on the water
temperature selected.
\
Heavy
Duty
Use this cycle for cottons and linens used regularly.
For maximum soil removal, you should set the Cycle
Selector (Timer) Control for the longest available time.
Rinse & Spin
Select this option if you think an extra rinse is needed. Set
OPTIONS Control (if available) to One Rinse. You should then
set the Cycle Selector (Timer) Control knob to a Rinse setting.
Normal
i Casual
Select this cycle for synthetic fabrics such as dress shirts,
blouses, and slacks. The cycle will give you a load-cooling
spray rinse to reduce wrinkling.
Delicate
This cycle features brief periods of intermittent agitation
to clean lightly soiled items.
Spin
Only
A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set OPTIONS Control (if available)
to One Rinse. You should then set Cycle Selector (Timer)
Control to a Spin setting.
./
TR@UBLESH@@TIN@
- SegN#$ and LEAKS
Before you call service...check
for the following.
Loud cBcking and banging?
• The yellow shippingstrap may still be inthe rearof the
washer. Completely remove the yellow shippingstrap.
• The washer should be level, and the feetshould be firmly
on the floor.
Some sounds are normal but may be different from
those of your previous washer.
• The gears engaging after the drain and before the spin.
• The sound of air being pulled through the pump after most
of the water has drained.
Is the washer leaking?
• Fill hose connections are tight
• Gaskets in flit hose are tight and flat
• Drain hose clamp is securely attached
• Faucets, drain/standpipe, or laundry tub is not leaking
• The washer tub is centered, and the load evenly balanced
at the start of each toad
• The washer is level
• The front feet are installed, and the nuts are tightened
to the cabinet
See the Use and Care Guide for complete details.
W1002_71
_
® Registered Trademark / TM Trademark
/ SM Service Mark of
7/08
@ 2008 Sears Brands, LLC.
Sears Brands, LLC, used under licensee by Sears Canada Inc.
Printed in U.S.A.

Advertisement

loading

This manual is also suitable for:

2943*2944*W10026671a110.2943 series110.2944 series