System Settings; 1>Basic Settings; 2>Local Recording Management - TT INT'L HK Tech IP Cam User Manual

TT IP CAM User Manual
Enter account number, password, the server address, and port, then click the "Login" log server.
Account number, password, the server address and port come from two sources. One from NVR
authorized management, where NVR player is a client, the account is authorized by management
settings. Another is from the PMS functions, the default account is "guest", and the password is the
same as the camera's, the server address and port will be the name and port used in PMS registration.
After logging in successfully, you will obtain lists of cameras from the server.
<1.2> System Settings
System settings include basic settings and local recording settings. This also includes communication
protocols and buffer.
<1.2.1>Basic Settings
Media data reception includes both UDP and TCP, default reception as UDP. When
When reception set as UDP is unable to connect, Player automatically tries TCP connection；In addition,
TCP supports multiple channel streaming. This can increase the speed of data transmission, reducing
buffer period.
Local buffer settings allow you to adjust with or without buffer, buffer is set up when the network is
unstable, enhances the broadcast of continuous images, but the images will be delayed for a period of
time (usually about 10 seconds); The greater the buffer the stronger the continuity of images, at the
same time buffer time and delay time will increase; if network conditions are good, the system can be
set to no buffer, not only to maintain image but to also ensure the continuity of the real-time image.
- 44 -
http://www.ttipcam.com