Ptz Control - TT INT'L HK Tech IP Cam User Manual

TT IP CAM User Manual http://www.ttipcam.com
User will select the most suitable one for application. For example, to record video in LAN (NVR mode)
will require better video quality if storage capacity is not concerned. To view from the internet will require
the selection of a lower resolution depending on the network bandwidth.
The default settings are 15FPS, QVGA and 200Kbits. User should adjust the settings according to the
application requirement and network environments.
Click on Video and get the GI page:
Brightness：Adjust the bar to change the brightness.
Contrast：Adjust the bar to change the Contrast.
HUE：Adjust the bar to change the HUE.
Saturation：Adjust the bar to change the saturation.
FPS: Click the list icon and select the frame-rate.
RES: Click the list icon and select the resolution.
Fixed Quality/ Bitrate: User is able to fix the quality of video or the bitrate.
BPS：Move the bar to change the bitrate.
<3.4> PTZ Control
Click on PTZ to get to the PTZ control UI page shown as below.
- 14 -