Octane Fitness PRO4700 Assembly And Operation Instructions Manual page 5

Warm-Up Controls 3-minute warm-up: ON or OFF
Clock Controls clock counting: UP or DOWN
Direction
Max Sets limit for workout time: 1 to 99 minutes (factory-set at 30:00). Press Enter to scroll in
Workout
15-minute increments, or enter value using number keypad.
Time
Unit Type Controls weight and distance display units: ENGLISH (pounds and miles) or METRIC
(kilograms and kilometers)
900MHz Initiates channel programming; press Enter to begin. Press CH () to select the appropriate
(800MHz)
program modes for your facility:
Channels
P-1 = MYE Entertainment 900MHz (800MHz) transmitters
P-2 = Cardio Theater LCS 900MHz (800MHz) transmitters
P-3 = Cardio Theater / Enercise x TV 900MHz (800MHz) transmitters
P-4 = BroadcastVision 900MHz (800MHz) transmitters
To automatically scan and program channels:
With the proper transmitter mode displayed, press Enter to auto-scan and lock
transmitters. Repeat as needed for each transmitter type.
Press CH () or CH () to verify that "PRESET" appears in the display, indicating that all
transmitters have been locked in.
Press EQ to save 900MHz (800MHz) CHANNELS and return to user settings.
To manually program channels:
With the proper transmitter mode displayed, press EQ.
Press CH () or CH () to scroll through all transmitter channels.
To add or delete a transmitter channel press Enter. NOTE: "PRESET" will appear in the
display when a transmitter channel is programmed.
To exit manual program mode press the EQ button. The display will blink briefly and will
default to first transmitter channel programmed.
Use the CH () or CH () to select another transmitter type (P-1 to P-4) as needed and
repeat these manual steps.
Press EQ to save 900MHZ (800MHZ) CHANNELS and return to user settings.
900MHz Sets the reception sensitivity of the 900MHz (800MHz) receiver, FAR (for most installations)
or NEAR (when receiver is installed 1-5 feet from a transmitter). Press Enter to switch from
(800MHz)
Near/Far one setting to the other. The Message Center displays the revised setting for 5 seconds,
then returns to 900 MHZ (800mhz) NEAR/FAR.
Beep Controls console sounds: ON or OFF.
Brightness Controls brightness of the console LEDs: 1 (dim) to 8 (bright).
Exit Press Enter to Exit and save settings. Press Pause Clear twice to exit without saving.
USER SETTINGS
4