ZR8000 STANDARD CONSOLE GUIDE Get ready to run for the rest of your life with the Zero Runner by Octane Fitness. The Zero Runner simulates real running motion, engages all the muscles and delivers the multiple benefits of running, without impact to your joints or body.
Dynamic Display (LCD) The top portion of the standard console is an LCD which dynamically displays all of the important workout data and guides your workout with intervals and motion changes. Watch the display—it will coach and motivate you throughout your workout and reward you with summary information at the end of your session. Icon Description Displays workout time, counting up from 00:00.
Page 6
Icon Description Displays the resistance level (1-10), where 1 is the lowest resistance level and 10 is the highest. Adjust the resistance by moving the adjustment lever located just below the console. Positioning the lever all the way down (by the “–” on the lever label) sets the resistance at Level 1;...
Keypad Buttons Quick Start The easiest way for you to start your run is to simply push the Quick Start button. The clock starts timing you for a 30-minute run (the Maximum Workout Time allowed by the club if that maximum is less than 30 minutes.) The calories readout will be based on a 150 lb.
You may turn the console sounds “ON” or “OFF”. The factory default setting is “ON”. If you have more than one Octane Fitness unit on site, use this setting to give each a unique identification number for pairing with a mobile device. Choose any value between 0 and 127.
Please contact your local Octane Fitness dealer should you have any questions or encounter any maintenance issues with your Zero Runner. If you would like to speak directly to an Octane Fitness customer service specialist, please call 888.OCTANE4 or 763.757.2662, ext. 1, or visit www.octanefitness.com.