Kenmore 116.32735 Owner's Manual page 19

Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
TO REMOVE LIGHT BULB
Disconnect power cord from electrical out-
let. Lower handle to lay vacuum flat,
Flat
Headfight
Pry out light
lens at
slots
CAUTION
Do not use a bulb rated over 9W
(13V). During extended use, heat from
the bulb could overheat surrounding
plastic parts.
Remove the light
bulb by pulling
straight out.
To replace
the light
bulb care-
fully insert
securely
into slot.
Replace lens cover by inserting bottom tab
of lens into slot then applying pressure to
top tabs with a screwdriver. A "popping"
sound indicates lens is snapped properly in
place,
Note: See PARTS AND FEATURES for bulb
number.
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from clean-
er or agitator suddenly starting,
To clean agitator turn vacuum over, cut off
any carpet pile and lint entangled around
agitator with a pair of scissors in the slots
provided, Remove hair, string, lint and other
debris from the agitator,
19