Kenmore 116.32735 Owner's Manual page 18

Always follow all safety precautions when
cleaning and servicing the vacuum cleaner.
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
If the cleaner does not seem to have ade-
quate suction, first check if the dust bin is
full or if a filter is clogged, See DUST BIN
CLEANING and FILTER CHANGING°
If the dust bin and filter areas are free of
clogs, check the hose area° Remove exten-
sion hose from the valve assembly by
grasping the hose collar, twisting, and
pulling straight off.
\ H°s° !II
Deep Clea,,l,,g' J
NozzleHose _ _
Valve
Assembly
I"
Lift Here
Visually inspect the hose and the base area
into which the hose is connected.
Remove any visible clog.
Re*connect the extension hose to the valve
assembly. Plug in the vacuum and turn it on.
Stretch the hose to maximum length and
then allow the hose to return to its storage
length,
Turn the unit off and unplug the unit.
Remove dust bin and check dust bin port
and secondary screen for clogs. If the dust
bin and filter areas and the hose areas are
free of clogs, check the nozzle area. To
check this area, see the section on AGITA-
TOR CLEANING.
Secondary
Dust Bin
Port
Return the cleaner to the upright position
before plugging into an electrical outlet.
Personal Injury Hazard
DO NOT place hands or feet under-
neath the unit at any time, The agita-
tor will be revolving rapidly when
the vacuum is turned on and is in
the carpet setting,
iii
18