Table of Contents
Advertisement
The valve assembly will be closed when
the cleaner is in the upright position° When
you release the handle for normal
operation the valve opens to allow air to
pass for normal deep cleaning. This valve
will sometimes become dirty and may
need routine cleaning.
To clean the valve you must first remove
the deep cleaning
nozzle hose to gain
access to the valve. Once the hose is
removed,
wipe the surface
of the valve.
Release the handle (see Handle Release
section, page 8) and lay cleaner back,
With the cleaner in the back position the
the valve is open. Wipe the inside with a
soft cloth to remove any dirt or residue,
Return cleaner to the upright position. Re-
attach nozzle hose and extension
hose°
Hose
Deep Cleaning _
Nozzle Hose
Valve
Assembly
Ll_Here
2O
Advertisement
Table of Contents
