Superior VCI3032ZMN Installation And Operation Instructions Manual page 9

Screen Mounting Shoulder
Screw (4) (DO NOT DISCARD)
Shipping Screw
(DISCARD)
Figure 5 - Removing Screws and Screen
Screen
Mounting
Shoulder
Screws
(5/16")
Phillips
Screw
Figure 6 - Attaching Left Surround Side Panel
Phillips
Screws
Top Louver
Figure 7 - Removing Louver
127119-01A
INSTALLATION Continued
Shipping Screw
(DISCARD)
Surround Side
www.Superiorfireplaces.US.com
5. Place top surround panel at top of fireplace insert. Bottom edge
of panel will slide under top edge of insert. Align top panel screw
holes with those in insert. Install four #8 Phillips screws, do not
tighten. See Figure 8.
6. Align screw holes in side panels with holes in top panel (see
Figure 9). Insert and tighten #8 Phillips screws.
7. Reinstall louver removed in step 4, page 8.
8. Carefully inspect fireplace surround assembly. Make sure each
part fits properly. Firmly tighten all screws installed during as-
sembly.
CAUTION: Do not overtighten. Metal can bend,
warp or break under excessive strain.
9. Install trim after final finishing and/or painting of wall.
Top Surround
Panel
Phillips
Screws (4)
Figure 8 - Attaching Top Surround Panel
Figure 9 - Attaching Side Panels to Top Panel
Top Edge of
Fireplace Insert
Top Panel
Phillips Screws
Side
Panel
9