Fuses; Tracking - Dixon ztr dx260 Operator's Manual

Fuses

Fuses are located on the right hand side of the
machine. they are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles.
there are three fuses with ratings and functions:
1. 20 A, Primary fuse.
2. 7.5 A, Mower deck coupling.
3. 10 A, Accessories

Tracking

If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure for the rear tires is 15 psi (1 bar).
1. tracking adjustments are made using the tracking
bolts. the tracking bolts act as limiting devices for
the motion control levers when in the full-forward
position.
2. For preliminary tracking adjustment, move unit
to an open, unobstructed area such as an empty
parking lot or open field.
3. Back the tracking bolts out until flush with nut.
4. test operate the unit by driving it at full throttle
and the full forward position on both motion
control levers. Gradually turn in the right hand
tracking bolt until the unit noticeably starts drifting
right.
5. Drive forward at full throttle with both motion
control levers in the full forward position.
Gradually turn in the left tracking bolt until unit
tracks straight.
22
CONTROls
Fuses
Tracking adjustment
8065-043
8065-060