Table of Contents
Advertisement
2
Select Setup > Reset > Waypoints > Yes.
Routes
A route is a sequence of waypoints or locations that leads you
to your final destination.
Creating a Route
1
Select the Orange key.
2
Select Routes > Create New.
3
Select First Point.
4
Select a category.
5
Select the first point on the route.
6
Select Next Point.
7
Repeat steps 4–6 until the route is complete.
8
Select Done to save the route.
Editing the Name of a Route
1
Select the Orange key.
2
Select Routes.
3
Select a route.
4
Select Rename.
5
Use the Orange key,
, and
6
When finished, select _ > Done.
Editing a Route
1
Select the Orange key.
2
Select Routes.
3
Select a route.
4
Select Edit.
5
Select a point.
6
Select an option:
• To view the point on the map, select Details.
• To change the order of the point on the route, select
Move Up or Move Down.
• To insert an additional point on the route, select Insert.
The additional point is inserted before to point you are
editing.
• To remove the point from the route, select Remove.
Viewing a Route on the Map
1
Select the Orange key.
2
Select Routes.
3
Select a route.
4
Select View Map.
Deleting a Route
1
Select the Orange key.
2
Select Routes.
3
Select a route.
4
Select Delete > Yes.
Reversing a Route
1
Select the Orange key.
2
Select Routes.
3
Select a route.
4
Select Reverse.
Tracks
A track is a recording of your path. The track log contains
information about points along the recorded path, including
time, location, and elevation for each point.
4
to enter characters.
Recording a Track
1
Select the Orange key.
2
Select Start GPS.
3
Wait while the device locates satellites.
4
Walk around to record a track.
Your distance and time appear.
5
Select
to view the loop of data pages including compass
data, altimeter data, ascent and speed, the map, and the
time of day page.
You can customize the data pages
6
Hold
.
7
Select an option:
• Select Pause Track to pause tracking.
• Select Save Track to save your track.
• Select Clear Track to erase the track without saving.
• Select Stop GPS to turn off GPS without deleting your
track.
Saving the Current Track
1
Select the Orange key.
2
Select Tracks > Current.
3
Select an option:
• To save the entire track, select Save.
• To save part of the track, select Save Part, and select the
part to save.
Viewing Details about the Track
1
Select the Orange key.
2
Select Tracks.
3
Select a track.
4
Select View Map.
The beginning and the end of the track are marked by flags.
5
Select
> Details.
6
Use
and
to view information about the track.
Clearing the Current Track
1
Select the Orange key.
2
Select Tracks > Current > Clear.
Deleting a Track
1
Select the Orange key.
2
Select Tracks.
3
Select a track.
4
Select Delete > Yes.
Sending and Receiving Data Wirelessly
Before you can share data wirelessly, you must be within 10
feet (3 m) of a compatible Garmin ® device.
Your device can send or receive data when connected to
another compatible device. You can share waypoints,
geocaches, routes, and tracks wirelessly.
1
Select the Orange key.
2
Select Share Data > Unit to Unit.
3
Select Send or Receive.
4
Follow the on-screen instructions.
Navigation
You can navigate to a route, track, waypoint, geocache, or any
saved location in the device. You can use the map or the
compass to navigate to your destination.
(page
8).
Navigation
Advertisement
Table of Contents
