Table of Contents
Advertisement
SECTION
5,
CARE FOR THE MACHINE
Replacing the Light Bulb
Cleaning the Machine
To insure that
your
machine
operates
at its best, you need to keep the essential parts clean at all times.
The feed
dogs and shuttle
race areas can attract
dust and lint.
Your
machine
can become
sluggish or knock
loudly
if a thread
is caught.
Check and clean those areas about
every
three months
under normal
use.
If you sew frequently,
clean more often.
•
Clean the Feed Dogs
1.
Unplug the machine and open the
face cover.
CAUTION!
The
light
bulb
could
be
HOT.
Protect
your
fingers
when
you
handle
it.
2.
Push
the
bulb
up and turn
the
bulb
counter-clockwise
to remove
it.
3;
Put the new bulb
in by pushing it
up and turning
it clockwise.
Follow
these directions:
Unplug
the
machine.
Remove
2.
Use a lint
brush
to clean
the feed
presser foot
and needle,
dogs,
Using
a
screw
driver,
remove
needle plate.
3.
Replace needle plate.
40
Hide quick links:
Advertisement
Table of Contents
