Kenmore SEARS 385. 17622 Owner's Manual page 17

Stitch Selector
Jr. ..... I I Selector Release
Setting mark (_)_etting
mark @_
/" "'_tito.
Selector
=. = =
= \=
lt%.o_Pattern Selector Dial
1)
2)
Raise the needle to its highest position.
Select the desired pattern at the setting mark(_)by turning the pattern selector
dia!. Dial will not turn past "SELECT" without moving selector release to the
right,
When you select patterns A to I
a) First, slide the selector release to the right so that the "SELECT A to !" mark
on the selector release meets the setting mark@on the machine.
b) Then, select the desired pattern at the setting mark I by turning the pattern
selector dial.
c) Slide back the selector' release to the left so that the "SEW" mark on the
selector release meets the setting mark(_)on the machine.
Note: Do not turn the pattern selector dial while the needle is in the lower
position. It may cause the needle to'break.
SECTION 2. PREPARE THE MACHINE FOR SEWING
stitch patterns are color-coded to recommend setting zones at the stitch
length control.
ZONES
• Red ......... Straight, Zigzag and Utility Stitches
• Green ........ Geometric Decorative Stitches
• Blue ......... Built-in Buttonhole Making
• Brown ....... Stretch Stitches
15