Threading Of Top Thread - Kenmore 1357 Instructions Manual

THREADING OF TOP THREAD
Place thread on spool pin as shown
with thread coming from the back of
the spool. Draw thread through the
top thread guide, Holding the spool
stationary with right hand, pull the end
of the thread between the tension discs
as shown. Pull the spring wire loop up
and past the top hook until the thread
can be slipped into the hook (See Fig.
2). When the thread is released, the
spring wire loop will return to position
(See Fig. 3) with thread in proper place.
Release spool of thread and continue to
thread machine exactly as shown.
Needle must always be threaded in
direction as shown in Fig. 4.
Hold needle thread loosely in left hand
and rotate hand wheel toward you one
complete turn. Bring bobbin thread up
by pulling upper thread. (Fig. 5),
9