Linksys SPA2102 Configuration Manual page 2

Setup and voip configuration guide

Hide thumbs Also See for SPA2102:

STEP 6 Power on the cable/DSL modem.

STEP 7 Connect the included power adapter to the Phone Adapter's power port as shown in Figure

4 and then plug the power adapter into an electrical outlet. The power LED on the front

panel will light up as soon as the Phone Adapter powers on.

Figure 4

NOTE: Make sure your PC's Ethernet adapter is set to obtain an IP address automatically.

II. Configure the Phone Adapter

STEP 1 Launch the web browser on the PC.

STEP 2 Enter http://192.168.0.1/ advanced in the Address field (192.168.0.1 is the default local IP

address of the Phone Adapter). Then press the Enter key.

STEP 3 Click on Admin Login and the click on the Router Tab. Choose the Internet type in the drop

down.

STEP 4 Next, choose from the main menu 'Voice' and then Line1. Enter your Asiadigicall VOIP

number into the User Id: field and Asiadigicall SIP password into the Authenticate Password: field.

Enter 221.133.209.9 into Registration/Proxy Server: field. Repeat Step 5 for line 2.

Example:

Proxy: 221.133.209.9

Display Name:

User ID: 61055001000

Password: 123456

STEP 5 Click on the "Submit All Changes" button to save the settings.

STEP 6 Make Calls!

Enter your full name, this will show up as part of your callerid.