Section 6: Features And Benefits - Land Pride FM3072 Operator's Manual

Section 6: Features and Benefits
Features and Benefits
Section 6:
Features
Key widths
Gearbox HP Rating
7 3/4" Left & right-screw type
offset hitch
ACME threads on offset
Gearbox Warranty
540 RPM cast iron gearbox
with over-running clutch
1/2" – 6" Cutting height
1" Cutting capacity
(30 Series)
2" Cutting capacity
(40 Series)
Fine cut knives
(30 Series)
Forged hammer knives (40
Series)
Brush rake teeth
(40 Series)
5 1/2" Rotor diameter
Reverse rotor rotation
Cat. 4 driveline
3 'C' Section belts
3/16" Deck thickness
Baffles on top inside of deck
Hinged rear gate
Height adjusting roller
Scrapers
High knife tip speed
16 Series No FM3072, FM3088 & FM4088 Flail Mowers 309-106M
Table of Contents
FM30 & FM40 Series Flail Mowers
30 Series: 72", 88"; 40 Series: 88"
35 - 80 HP
Easily offset the hitch for roadsides or getting under tree limbs.
ACME threads are deeper allowing for easy screwing adjustment.
One year on all components.
Enables the rotor to free swing to a stop when the tractor PTO has been turned off.
Variable cutting heights for many uses.
Cut saplings when used in a rough setting.
40 Series is good for chopping up tree trimmings.
Heavy enough to cut 1" material, yet fine enough to groom a yard.
Forged hammers are just right for chopping up prunings up to 2" thick, but will also groom
grass in a very acceptable manner.
The adjustable brush rake teeth continually push prunings into the knife path for repeated
chopping action.
Large rotor is able to take rough conditions.
Brings the cut material up and over which allows it to be dispersed more evenly.
Heavy-duty driveline matches up with HP range as well as potential conditions.
'C' Section belts have more surface to pulley contact, and fits deeper in the groove.
Allows the mower to handle rough conditions.
Keeps the cut material from clumping together, ensuring an even distribution of clippings.
Can be opened for easier discharge in heavy conditions, or left closed for greater mulching
capabilities.
Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging
during turns.
Standard scrapers on rear height adjusting roller, keeps roller clean for consistent cutting
height
Knife tip speed of 8,705 fpm for cleaner cut.
Benefits
Land Pride
7/06/06