Land Pride FM20 Features And Benefits

Flail Mowers
Features and Benefits
Flail Mowers
Features
Key widths
6 1/4" Right,
centered offset hitch
Gearbox HP rating
3/4" – 4" Cutting height
Gearbox Warranty
1" Cutting capacity
4 1/4" Rotor diameter
Reverse rotor rotation
Cat. 4 driveline with over-
running clutch
3 - "B" Section belts
3 Fine cut knives per hanger
High knife tip speed
Adjustable rear panel
Baffles on the top inside of the
deck
Height adjusting roller
Scrapers
Designs, specifications, features and information are subject to change without notice.
4/08/08
FM20
60", 72"
The two position hitch for offsetting the mower allows closer cutting along buildings, fences
or roadsides.
25 - 55 HP to fit a large array of tractors
Low cutting height allows for scalping in grasses such as Bermuda prior to overseeding.
One year on all components
Can cut small saplings.
Large rotor diameter protects against obstructions.
Reverse rotation brings the cut grass up and over the rotor for a cleaner discharge.
Upon disengaging the PTO, the over-running clutch allows the driveline to quit turning, while
the clutch yoke, gearbox and rotor shaft slow down by their own inertia.
"B" Section belts fit snug in the sheaves, and the multiple belts ensure positive transfer of
power.
Helps eliminate the peak and valley cut left with many fine cut blade arrangements.
Knife tip speed of 8,705 fpm for cleaner cut.
Rear panel adjusts to allow stronger discharge of material. Also aids in cleaning underside
of deck.
Keeps the cut material from clumping together, ensuring an even distribution of clippings.
Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging
during turns.
Standard scraper on rear height adjusting roller.
Benefits
20
309-100F