Kenmore 795.6827 Series Use & Care Manual page 19

• Take Door Closer/Stop and flip. Line up screw
holes and mount on left side of door bottom with
the 2 screws. Turn door upright and set aside.
Fig. 68
Use a 10mm or 13/32 inch socket wrench to remove
the 2 bolts in Middle Hinge Bracket. Remove 2
screws. Set Middle Hinge Bracket and other parts
aside.
• With a flat-head screwdriver, carefully pry off and
remove the cover over the screw holes on the left side
of refrigerator housing.
Fig. 70
• Flip the middle hinge bracket and position on
left side of refrigerator and re-attach with
two bolts and a 2 phillips screws.
Fig. 73
ge
Bracket
• Using a 13/32" or 10mm socket wrench with
2" extension, loosen the 2 bolts and remove
bottom hinge from right side.
Fig. 74
Bottom Hinge
Bracket
• Remove the bolt on bottom of refrigerator from
the left side and insert it on the right side.
You will need this hole for the Bottom Hinge.
• Remove the 2 outer screws from cabinet frame as
shown.
You will need these holes for the Middle Hinge Bracket.
Fig711:_t _
• Place screws into outer holes on right side of cabinet.
• Attach cover on the right side. Cover is force-fitted.
Fig. 75
Left Sid{ _,ight Side
• Move the Bottom Hinge to the left side keeping
the same orientation and attach 2 bolts.
Fig. 76
19