Kenmore 795.6827 Series Use & Care Manual page 14

• Remove Washer and set aside.
• Using a 1/4 socket wrench, loosen and remove
Hinge Pin from the Middle Hinge Bracket.
Pin
• Flip the middle hinge bracket and position on
left side of refrigerator and re-attach with
two bolts and a 2 phillips screws.
Fig. 36
ge
Bracket
• Use a 10mm or 13/32 inch socket wrench to remove
the 2 bolts in Middle Hinge Bracket. Remove 2
screws. Set Middle Hinge Bracket and other parts
aside.
• With a fiat-head screwdriver, carefully pry off and
remove the cover over the screw holes on the left side
of refrigerator housing.
Fig. 33
• Remove the 2 outer screws from cabinet frame as
shown.
You will need these holes for the Middle Hinge Bracket.
F 34
• Place screws into outer holes on right side of cabinet.
Attach cover on the right side. Cover is force-fitted.
Fig. 35 ,_J_ [_ I
• Attach Middle Hinge Pin and replace washer.
• Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Middle Hinge Bracket
• Line up Top Hinge with holes in top of
refrigerator. Use the 3 bolts to replace the Hinge.
Fig. 38
Top Hinge
Top Hinge
• Tighten Bolts. Force-fit Top Hinge Cover over top
Hinge.
Fig. 39
14