Kenmore 795.6827 Series Use & Care Manual page 11

• Remove the screws of the rail on both sides.
Fig. 8
screw
[] CAUTION:When removing drawer door, do not hold it by
the handle. Door could fall down and you may be injured.
Grasp door with both hands as pictured below when
removing.
[] CAUTION: When laying down the drawer, be careful
not to damage the floor or hurt your feet with the sharp
edges on hinge side.
• With both hands, hold both sides of the door and pull it
up to separate it from the rails.
Fig. 9 _ ::i
ql . ,jOoor
Fig. I Oz MI supports
a,,ta es
• Push rails back into drawer cavity. With both hands,
hold the center of the bar and push it in so that both
rails go back simultaneously.
Fig. 11
REPLACING REFRIGERATOR DOOR
• Reattach Middle Hinge Bracket with the previously
removed 2 bolts and 2 screws.
-Screws
(2)
Fig. 13
• Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Fig. 14
Middle Hinge
• Line up Top Hinge with holes in top of
refrigerator. Use the 3 bolts to replace the Hinge.
Fig. 15
Top
• Tighten Bolts. Force-fit Top Hinge Cover over top
Hinge.
Fig. 16
11