Pantry; Crisper Humidity Control; Optibin Crisper - Kenmore 795.7130-K Use & Care Manual

PANTRY
(on some models)
Adjust the control to desired temperature by moving from
COLD to COLDER,
Pull forward to open, Lift slightly and pull it out to remove,
To remove the glass:
1. Lift up the glass after inserting a screwdriver under
the crisper cover.
2. Pull glass cover up and out.
CRISPER HUMIDITY CONTROL
(on some models)
You can control the amount of humidity in the moisture-
sealed crispers, Adjust the control to any setting between
"FRUIT" and "VEGETABLE",
"FRUIT" Lets moist air out from crisper for best storage of
fruits,
"VEGETABLE" Keeps moist air in crisper for best storage
of fresh, leafy vegetables,
jJ
n
f
FRUITS / VEGETABLES
J
To remove the crisper cover support:
NOTE: Remove glass before removing the crisper
cover support.
While holding the crisper cover support with both
hands (as shown in the image below). Pull
forward and slightly lift the front part.
OPTIBIN CRISPERS (on some models)
The OptiBin Crispers provide fresher-tasting fruit and
vegetables by letting you easily control humidity inside the
crisper. The OptiBin Crispers include: 1) a humidity
control knob at the front of the crisper cover and 2) a
large lattice on the inner surface of the cover to hold
or release moisture.
To remove the crisper:
1. Slide crisper straight out to the stop.
2. Lift the front of the crisper, then pull it out to remove.
3. Replace the crisper by sliding it back in fully past the
drawer stop.
To remove the glass:
1. Lift up the glass after inserting a screwdriver under the
crisper cover.
2. Pull up and out.
r_WARNING: Be careful when handling the glass cover since
the glass is not attached to the cover.
19