About The Custom Cube Ice Maker - Kenmore 795.7130-K Use & Care Manual

Bottom freezer refrigerator
Table of Contents

Advertisement

ICEMAKER
Personal Injury Hazard
Avoid contact with the moving parts of the ejector
mechanism, or with the heating element that releases
the cubes. DO NOT place fingers or hands on the
automatic icemaking mechanism while the refrigerator
is plugged in.
OPERATION
INSTRUCTIONS
NOTE: Automatic Ice Maker feature is included only in
certain models. Please check your product specification.
A newly-installed
refrigerator
may take
12 to 24 hours to begin making ice.
Ic
•Feeler Arm
This type of icemaker will produce twelve cubes per cycle
approximately 80-100
cubes in a 24-hour period,
depending on freezer compartment temperature, room
temperature, number of door openings and other
operating conditions.
If the refrigerator is used before the water connection is
made to the icemaker, set the power switch to O (off).
When the refrigerator has been connected to the water
supply, set the power switch to I (on).
The icemaker will fill with water only when it cools to freezing.
A newly-installed refrigerator may take 12 to 24 hours to
begin making ice cubes.
Throw away the first few batches of ice to allow the water
line to clear.
Be sure nothing interferes with the sweep of the feeler
arm.
When the bin fills to the level of the feeler arm, the
icemaker will stop producing ice.
It is normal for some cubes to be stuck together.
If ice is not used frequently, old ice cubes will become
cloudy, taste stale, and shrink.
WHEN YOU SHOULD
SET THE ICEMAKER
POWER
SWITCH
TO O (OFF)
• When the water supply will be shut off for several hours.
• When the ice storage bin is removed for more than a
minute or two.
• When the refrigerator will not be used for several days.
NORMAL
SOUNDS
YOU MAY HEAR
• The icemaker water valve will buzz as the icemaker fills
with water. If the power switch is in the I (on) position, it
will buzz even if it has not yet been hooked up to water.
To stop the buzzing, move the power switch to O (off).
NOTE: Keeping the power switch in the I (on) position
before the water line is connected can damage the
icemaker.
• You will hear the sound of cubes dropping into the bin
and water running in the pipes as the icemaker refills.
PREPARING
FOR VACATION
Set the icemaker power switch to O (off) and shut off the
water supply to the refrigerator.
If the surrounding air temperature will drop below freezing,
have a qualified servicer drain the water supply system to
prevent serious property damage due to flooding from
ruptured water lines or connections.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

795.7130 series

Table of Contents